Common Sealcoating Mistakes: Avoid These Pitfalls

Common Sealcoating Mistakes: Avoid These Pitfalls


Sealcoating is a necessary part of maintaining any asphalt pavement surface. A regular application of sealant can help protect against the elements and extend the life of a pavement. Unfortunately, many people make mistakes when it comes to sealcoating, resulting in inferior results and a waste of money. In this blog post, we will discuss some common sealcoating mistakes to watch out for so that you can avoid making them. If you need help with sealcoating in Lake County, FL, contact Reliable Pavement Maintenance today to request an estimate.


1. Failing to Clean the Surface

One of the most common mistakes people make when sealcoating their pavement is failing to adequately clean the surface beforehand. If there is dirt, debris, or other contaminants on the pavement, it will not adhere well with the sealant, resulting in a poor finish. Make sure to thoroughly sweep and power wash the pavement before sealcoating it to ensure a clean surface.

2. Applying the Sealant Too Thinly

Another mistake people make is not applying the sealant thick enough. A thin layer will not provide the necessary protection a pavement needs. It is essential to apply a generous, even coat of sealant to ensure adequate coverage. A professional sealcoating service like Reliable Pavement Maintenance will know the proper thickness for the best results.

3. Applying Sealant in the Wrong Weather

The weather and temperature can affect the outcome of the sealcoating process. Sealant should never be applied during freezing temperatures or in the rain. Additionally, make sure to allow adequate time for the sealant to cure before exposing it to heavy traffic. Professional sealcoating services like Reliable Pavement Maintenance know when it is the proper time to apply sealant depending on the weather.

4. Rushing Through the Process

Applying sealant too quickly, expecting it to dry too fast, or rushing through the process can lead to disastrous effects. Make sure that you give it ample time so it will cure correctly. Also, remember that the first coat should dry completely before adding another layer. If you apply sealant too quickly, you may seriously ruin the entire operation and find yourself back to square one.

5. Not Applying Enough Sealer

Finally, one of the biggest mistakes people make is not applying enough sealer. This can happen because the sealer was improperly mixed, applied too thinly, or they did not purchase enough. This mistake can cause your pavement to deteriorate much quicker than you would like. Therefore, make sure you take enough time and buy enough material to get the job done correctly.



Sealcoating is essential for maintaining your pavement surface. Still, many people make mistakes when it comes to the application process. Whether the surface was not properly cleaned before the sealant was added, the sealant was applied too thinly, or the weather was not right, these errors could lead to a waste of time, money, and other resources. If you need help with sealcoating in Lake County, FL, contact us at Reliable Pavement Maintenance today. Our knowledge and expertise in the field of sealcoating allow you to keep your pavements in top condition for many years. With our reliable services, you won't have to worry about making any of these sealcoating mistakes. Contact us today to request a quote.

To Top